|
Post by 89toyrobb on Nov 27, 2003 16:07:48 GMT -5
I swapped in a factory 4.88 IFS frontend after puttin in 4.88's in the rear. The problem is I noticed my driver side axle tube(long side) is leaking oil a little, where the axle slides into the tube(right before it bolts to the CV)? I noticed there was a little play in it too, thats probably why it is leaking. Does anyone know how I could fix this?
|
|
|
Post by 86taco on Nov 27, 2003 16:50:43 GMT -5
most likely its the oil seal that is in there. I would order one from the parts store and replace it. Make sure you have your manual handy. what year etc. is the front end.
|
|