|
|
gears
Jul 14, 2003 21:51:16 GMT -5
Post by TonkaToy on Jul 14, 2003 21:51:16 GMT -5
I have a 98 tacoma with the 2.7 L , 5spd 4x4 and I want to put it up on 35's i know the stock gears
are not enough push them down the interstate so i would like to know witch gears will do the trick
My main purpose is a show truck not really a mudder so i need something more economical and not a killer on gas and my motor thanks could use the help
|
|
|
|
gears
Jul 15, 2003 13:30:54 GMT -5
Post by fourwd1 on Jul 15, 2003 13:30:54 GMT -5
You want to keep your RPM range with the new tire size the same as it is with the stock tire size. Typically 4.88 gears on 4 cyl 5 spd Toys which have 4.10's stock.
|
|
|
|
gears
Aug 24, 2003 6:15:31 GMT -5
Post by Baron Von Warner on Aug 24, 2003 6:15:31 GMT -5
this should help you identify what you have for gearing. ....i would regear to either 4.88's or 5.29's if you want to try and maintain some driveability . if you do indeed have 4.10's you might be able to run the bigger tires but i seriously doubt that you will like the lack of power , if you have 4.56's you should be able to run the 35" tires with a tolerable amount of power loss . 4.88's would be the way to go if it was my truck . i see far to many mall jockeys parading around with 35 inch tires and the wrong gears. ... here is a link for the axle codes www.off-road.com/toyota/taco/tech/axle/axlecodes.html ......Von Warner |
|
