98BlkTaco
New Member
98 4x4 - 3"EZ-lift,2" PA Body lift, 33x12.50 A/T's - air box mod w/ k&n air filter
Posts: 39
|
Post by 98BlkTaco on Jan 26, 2004 21:54:13 GMT -5
Hey guys - Im looking to put a 2.5" Daystar suspension lift on my 98 Taco. I was wondering when I take out the coil over set up - do I have to remove that spring or is it going to be contained to the shock? Also, will I have any problems with runnings 32's with this set up?  -Also, is there any other maker besides Daystar I should look into? Like Revtek, or Downey? let me know Later- |
|
Colotoyboy
Full Member
1990 Toy 4x4 pickup, exhaust, Amsoil(airbox mod) 31'' BFG Muds, Rancho 5000's, Hella 500's, Cobra CB
Posts: 173
|
Post by Colotoyboy on Jan 26, 2004 23:18:03 GMT -5
I have two buddies with tacomas that we put the daystar lift on and ran 32's. When you put the lift on you will take the spring and shock off, the lift will go above them and the shock will be put back in the spring. You wont have any problems runnin the 32's man. The revtek is a great kit also, but twice what the daystar is, look on ebay for good deals on the daystar 2.5. good luck! let me know if you have anymore questions.
|
|
98BlkTaco
New Member
98 4x4 - 3"EZ-lift,2" PA Body lift, 33x12.50 A/T's - air box mod w/ k&n air filter
Posts: 39
|
Post by 98BlkTaco on Jan 27, 2004 7:51:56 GMT -5
Cool. thanks for the help. So I dont have to control the spring with a clamp - or I do, Im still not sure of that  . Thanks again |
|
Colotoyboy
Full Member
1990 Toy 4x4 pickup, exhaust, Amsoil(airbox mod) 31'' BFG Muds, Rancho 5000's, Hella 500's, Cobra CB
Posts: 173
|
Post by Colotoyboy on Jan 27, 2004 10:03:03 GMT -5
You will need to rent a coil depressor for them.
|
|
|
|
Post by redtoy92 on Jan 28, 2004 13:51:38 GMT -5
your local autozone will let you rent on or use one for free if you are very nice. a better lift that is close to the same price is the cornfed lift. But the daystar is a good lift for the price and I would go with it if i didn't choose the cornfed. red
|
|
