|
Post by red85runner on Mar 7, 2004 21:53:44 GMT -5
i was muddin in my 97 taco and the it threw the belt off and the power steering pulley and shaft slid forward into the fan... anyways i limped it back and it slid back in and it was grabbing something because it certainly didnt turn freely, the question is... do i have to buy a whole new pump or is there a C-clip on the back side that holds the shaft into the pump??? a breakdown diagram link would be great!!!!!
|
|
|
Post by redtoy92 on Mar 18, 2004 2:53:26 GMT -5
don't know but you can buy a factory service man. off of ebay or the stealership or go get a basic one from autozone.
|
|
|
Post by Hoodlum on Mar 22, 2004 15:02:07 GMT -5
If you have access to a fax I can help you out I also need to know if you have a 4 or 6 cyl I work for yota and have all specs and diagrams at my finger tips it's just my computer capability is limited because it's at work and I don't have one at home never there
|
|