|
|
help
Mar 13, 2004 20:22:25 GMT -5
Post by blktoyo98 on Mar 13, 2004 20:22:25 GMT -5
i just bought a 3 inch body lift for my 98 tacoma and ive had a few problems installing it. it seems that two of the bolts in the bed, the ones with the nuts welded inside tha crossmember broke loose and now i cant get the bolts out to complete the lift. what do i do?
|
|
|
|
help
Mar 14, 2004 23:46:17 GMT -5
Post by snorkleman on Mar 14, 2004 23:46:17 GMT -5
Hmm... I'm not exactly sure which crossmember your talking about but... Is there a bolt stuck in the nut and the nut turns when you try to tighten it? Or are the nuts just not there anymore since they came loose? Either way, You might have to drill a hole in the side of the crossmember large enough to get to the nuts or to put one in. You might just have to come up with a fix that works other than what I mentioned. Sometimes you have to get creative in a pinch.
|
|
