|
|
Post by outdoorsbc on Apr 23, 2006 21:33:43 GMT -5
Hi guys, I have a 99 Taco, 3.4L, auto with ADD, all stock. Is there any necessary maintenance for the front wheel bearings/hubs? I have 90,000miles on the truck.  Thanks |
|
|
|
Post by Hoodlum on Apr 25, 2006 10:12:03 GMT -5
If you have the manual hubs you should take them apart from time to time and clean them and add some fresh grease. The bearings are sealed but it doesn't hurt to give them a good coat.
BUT since you have the auto hubs I've never had them so I'm uncertain how they are taken apart but should def have maintenence done.
|
|
|
|
Post by ganstatrucka on Apr 27, 2006 21:35:34 GMT -5
is it pretty basic to grease the bearing with lockin hubs is there any tips or tricks i should know
|
|
|
|
Post by mudwiser316 on Apr 27, 2006 23:50:04 GMT -5
get a manual and use it. do only one side at a time just in case you get lost you will the other side to use as a reference. just my $.02. later!
|
|
|
|
Post by ganstatrucka on Apr 28, 2006 12:49:28 GMT -5
thanks man i appreciate it
|
|
|
|
Post by ganstatrucka on May 10, 2006 22:20:34 GMT -5
ive got another Q!
do i need a press to put them back in
or do i even mess witht akin them out and just coat them on there
|
|
|
|
Post by Hoodlum on May 11, 2006 7:08:16 GMT -5
ive got another Q! do i need a press to put them back in or do i even mess witht akin them out and just coat them on there Just coat them. |
|
Thanks
