1988 4runner lift

barksdale
New Member

Posts: 6

1988 4runner lift May 10, 2007 13:15:18 GMT -5

Quote

Post by barksdale on May 10, 2007 13:15:18 GMT -5

I have an automatic 1988 4runner with 4 inch lift and 32's. Trailmaster up front and 3 inch spring lift along with 1 inch spacer block in the rear. Im looking to change gears and upgrade to 35's. Is the only situation with body lifts for automatic 4runners the fact that the gear shifter will be sunk in to the opening and be unable to change gears? I am willing to cut out a larger hole in my floor board. Will this fix my problem?

fourwd1 Global Moderator TOR Senior Member ROCK ABUSER Posts: 6,976	1988 4runner lift May 11, 2007 7:32:46 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by fourwd1 on May 11, 2007 7:32:46 GMT -5 You will need an adapter for the auto's linkage. The only maker of the adapter, and a BL for an auto equipped Toy, is Roger Brown. Quality stuff and good service. www.4crawler.com/4x4/ForSale/BodyLiftKit.shtml#ATbracket
	- - Seen in FOUR WHEELER magazine July 2006, OFF-ROAD magazine Feb 2007 - - '84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, 2" drive train lift, AP hy-steer, BudBuilt x-member/skidplate, 36" TSLs, 30 spline Longs, Chevys '83 P/U - Buick 231 V6, Holley 4 bbl, Weiand intake, TH350 L/U ... '89 4Runner - stock www.cardomain.com/id/fourwd1

barksdale New Member Posts: 6	1988 4runner lift May 11, 2007 8:07:52 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by barksdale on May 11, 2007 8:07:52 GMT -5 Thanks for the link! I was able to fit the new 35's, just had to grind dow some sheet metal in my wheel wells.

Post by barksdale on May 10, 2007 13:15:18 GMT -5

Post by fourwd1 on May 11, 2007 7:32:46 GMT -5

Post by barksdale on May 11, 2007 8:07:52 GMT -5