|
Post by 94linexyota on Jul 22, 2008 20:46:34 GMT -5
|
|
rocktoy
Full Member
Toyota rock crawlin guru
I can break anything!
Posts: 108
|
Post by rocktoy on Jul 22, 2008 23:46:41 GMT -5
|
|
|
Post by 94linexyota on Jul 23, 2008 7:38:42 GMT -5
what are you running for a motor in the 2.2 , if it s a mamba motor did you have to use a gear reduction. other question are your lower links above or below the tranny plate
|
|
rocktoy
Full Member
Toyota rock crawlin guru
I can break anything!
Posts: 108
|
Post by rocktoy on Jul 23, 2008 12:11:25 GMT -5
I run a 3cell lipo, Mamba max ESC and a 7t puller motor I had most of the popular combo's out there and this is by far the best. More low end grunt and fasted top end My lower links are mounted just above my skid. Close enough I dont hang up on the skid though. Skid is actually bowed up between the link now that I set it where I want it. with my setup I can run any form of a 4 link I want
|
|
|
Post by 94linexyota on Oct 1, 2008 18:57:54 GMT -5
always a work in progress wether it be in an rc crawler or a full size rig. the biggest thing is to have fun with it while it still works
|
|
|
Post by 94linexyota on Oct 1, 2008 20:08:52 GMT -5
|
|
|
Post by 94linexyota on Oct 13, 2008 18:11:24 GMT -5
sorry about the piss poor video quality but you can't expect a lot out of a cell phone oh and the location is @ purgatory chasm in sutton MA
|
|
|
Post by 94linexyota on Jan 23, 2009 7:53:40 GMT -5
|
|