4yota
New Member
Posts: 7
|
Post by 4yota on Sept 15, 2008 13:25:24 GMT -5
so the back of my 89 4runner only has about 3'' between fender and wheel while the front has about 8''. how can i change that? what's the cheapest way possible? I really hate the way it looks!!!!
Thanks in advance!
|
|
|
|
Post by Hoodlum on Sept 15, 2008 14:38:42 GMT -5
There are a few ways to fix this.
1.replace shocks(temporary fix)
2.change the shackles(longer version of a temporary fix)
3.replace the leaf springs OR add a leaf to the existing pack and shocks(the correct way but can be expensive)
4.combination of 1 & 2(I did this one) But I'm not sure how long this will keep her ass off the ground.
|
|
|
|
Post by orangeyota on Sept 16, 2008 22:54:55 GMT -5
i took some 3/4 ton dodge over lode springs and stacke and re arched my back prings with. it works realy well a lot stiffer thow.
|
|
|
|
Post by rockcrawlintoy on Sept 17, 2008 2:41:04 GMT -5
its a 4 runner it doesnt have leaf springs. i woul get stiffer coils or a spacer.
|
|
|
|
Post by Hoodlum on Sept 18, 2008 10:08:20 GMT -5
its a 4 runner it doesnt have leaf springs. i woul get stiffer coils or a spacer. I forgot that they have the rear coils on them  I would replace the coils.I can't stand spacers they make the ride too harsh but will do the job.IMO Good catch rockcrawlintoy  |
|
4yota
New Member
Posts: 7
|
Post by 4yota on Sept 19, 2008 23:03:43 GMT -5
sorry guys, screwed up it's a 89!
|
|
