|
|
Post by rotorhead on Feb 4, 2009 22:58:50 GMT -5
I have 93 toyota 4x4 22re and just replaced my head gasket and timing chain. My problem is that after putting everything together I have one electrical connector that I cant find where it plugs into. I bought the truck with the head removed and all the wires/hoses disconnected and not labeled. I managed to find where all the wires/hoses go other than that one connector. It is located on top center near the valve cover and looks like a connector that goes to the injectors. Is there supposed to be a spare connector? Need help.
|
|
|
|
Post by yotanut7 on Feb 4, 2009 23:39:03 GMT -5
It could be for the cold start injector. That sits in the upper part of the intake.
|
|
|
|
Post by kellenc on Feb 5, 2009 10:38:50 GMT -5
I agree with yotanut here is where I think the connector is. sorry I have no MS Paint skills.  |
|
|
|
Post by yotanut7 on Feb 5, 2009 13:44:13 GMT -5
Another option is to see what color the wires are going to the plug and get a wiring diagram and see what its for.
|
|
|
|
Post by whomadewho on Feb 5, 2009 19:25:56 GMT -5
I have that same extra plug on my 92 4x4. I have a factory manual and I spent hours looking through wiring diagrams,trying to figure out the same thing. I talked to the Toyota Dealer,he stated it has to do with - Federal - canada -califorina Emission standards,that the same wiring harness is used.
|
|
|
|
Post by rotorhead on Feb 5, 2009 22:06:26 GMT -5
Thanks for the help guys but I think whomadewho is correct. I finally finished putting everything together and it started right up. I have another question though, I started a new thread. Thanks.
|
|
