|
|
Post by stanmondz on Dec 8, 2009 9:31:57 GMT -5
i lost a rod bearing and killed the short block on my carbd 22r, i was given a 93 FI engine that has a bad head gasket or head, bottom end is solid(i know the owner). can i just drop my carbd head and intake on it ?
|
|
|
|
Post by fourwd1 on Dec 8, 2009 21:11:26 GMT -5
From 85 on, the 22R and RE (EFI) use the same head and block, so yes.
|
|
|
|
Post by stanmondz on Dec 8, 2009 23:25:55 GMT -5
cool, so i could swap the EFI over with a wiring harness and computer as well?
|
|
|
|
Post by fourwd1 on Dec 9, 2009 7:55:41 GMT -5
There's a little more to it, but yes. Search around, there's plenty of info on carb to EFI conversions.
|
|
|
|
Post by stanmondz on Dec 9, 2009 8:50:57 GMT -5
i found what i needed, thanks man. sucks that we already junked the 93, all the stuff i needed was there
|
|
|
|
Post by fourwd1 on Dec 9, 2009 12:14:40 GMT -5
That does suck.
|
|
|
|
Post by stanmondz on Dec 9, 2009 20:46:29 GMT -5
yeah, the worst part is that my 22r puked 3 hours after passing emisions
|
|
|
|
Post by stanmondz on Dec 15, 2009 7:34:56 GMT -5
got my engine, it did blow the head gasket. a little rust in the cylinders but its nothing a hone wont clean up
|
|
