racer85304
Full Member
89 toyota pickup, Aussie locker. MC4.7 gears
Posts: 135
|
Post by racer85304 on Aug 19, 2003 22:17:22 GMT -5
i have a 89 toyota 4wd pickup. ifs that is which sucks. but what is the easiest way to remove just the diff to take off the oil pan. i need the diff gone completely to do the rod bearings. please help.
thanks
|
|
|
|
Post by iluvdrt on Aug 20, 2003 20:53:03 GMT -5
well there isnt really an easy way. i would guess pull the axles off then just undo the driveshaft, next undo the brackets that hold it up. thats im pretty sure the only way without pulling the engine. i did my oil pan like that.
|
|
racer85304
Full Member
89 toyota pickup, Aussie locker. MC4.7 gears
Posts: 135
|
Post by racer85304 on Aug 20, 2003 23:49:25 GMT -5
i took out the brackets that hold up the diff. but did u pull out the half shafts. can u unbolt the half shafts from the axle housing. i still have the half shafts connected to the nuckles. i have the oil pan off with out taking the diff out but i need more room so i can do the bearings.
thanks man for your help
|
|
