Kpooch75
Junior Member
Forget the naysayers 'cause they don't mean a thing.
Posts: 62
|
Post by Kpooch75 on Sept 22, 2003 15:42:43 GMT -5
I'm trying to figure out which coil springs I should get for my '95 4Runner. I'm just trying to make it sit level. Will I need to get new shocks with both of these springs? or will the stock ones be long enough. Suggestions?? Also, will 32X11.50 BFG ats fit under a stock 95 IFS with a little t-bar cranking? Thanks in advance!
|
|
Kpooch75
Junior Member
Forget the naysayers 'cause they don't mean a thing.
Posts: 62
|
Post by Kpooch75 on Oct 2, 2003 10:22:44 GMT -5
And apparently nobody here knows any more than I do (not likely). Sweet, I guess I'll have to tear it up myself becuase the smart people are to selfish to share a bit of knowledge.
|
|
NCSU
Full Member
'94 Pickup 22RE, 2"body lift, 33x12.50 BFG A/T's, RS5000's, K&N, Airbox mod, Flowmaster-2.5"pipe
Posts: 245
|
Post by NCSU on Oct 2, 2003 12:51:49 GMT -5
I don't have a 4Runner, but instead a '94 Pickup. But, I am pretty sure that you will need to put a new set of coils to get your 4Runner looking level. I know that when I changed the stock shocks on my pickup to Rancho's, the ride height didn't not change much, if any. I am almost positive that you will be able to fit 32's on your 4Runner if you crank the T-bars a little. I have 31's with no problem and I know of others that have 32's and no lift, so you should be alright.
|
|
