NCSU
Full Member
'94 Pickup 22RE, 2"body lift, 33x12.50 BFG A/T's, RS5000's, K&N, Airbox mod, Flowmaster-2.5"pipe
Posts: 245
|
BG44K
Jan 7, 2004 1:07:47 GMT -5
Post by NCSU on Jan 7, 2004 1:07:47 GMT -5
Anyone know of anywhere to buy this stuff for a good price?
I have heard and read alot of good stories about it but haven't been able to find it.
Any bad experiences from it?
|
|
|
|
BG44K
Jan 7, 2004 3:02:05 GMT -5
Post by carlos4x4sand on Jan 7, 2004 3:02:05 GMT -5
What is this BG44K ur talking about?
|
|
|
|
BG44K
Jan 7, 2004 3:37:51 GMT -5
Post by DeadlyPeace on Jan 7, 2004 3:37:51 GMT -5
I believe you can't find it in any auto parts store. Might try a dealer or service station. If not then try here www.storesonline.com/site/598452/product/BG%20208?source=overture
The only bad thing about it that I know of is that it doesn't do more good if ou don't have about 100k on your engine. After that it's good to use it every 10k.
|
|
|
|
BG44K
Jan 7, 2004 5:58:59 GMT -5
Post by EWAYota on Jan 7, 2004 5:58:59 GMT -5
they also say that you need to try to keep in your tank for as long as possible, preferably 2 weeks, as that allows it enough time to do its work. but i found a web site where a guy ran some in his bmw and was pleased with his results... www.m3supercar.com/enginecare.htmlIm thinkin about throwing a bottle in my truck as soon as it gets out of the shop. |
|
NCSU
Full Member
'94 Pickup 22RE, 2"body lift, 33x12.50 BFG A/T's, RS5000's, K&N, Airbox mod, Flowmaster-2.5"pipe
Posts: 245
|
BG44K
Jan 7, 2004 11:15:45 GMT -5
Post by NCSU on Jan 7, 2004 11:15:45 GMT -5
Carlos, its a fuel additive made by BG products.
If I find any around here, I think I might give it a shot also.
|
|
|
|
BG44K
Jan 8, 2004 19:45:29 GMT -5
Post by EWAYota on Jan 8, 2004 19:45:29 GMT -5
Im thinkin about throwing a bottle in my truck as soon as it gets out of the shop. Nevermind, i'm getting new engine  , so i don't need to worry about that for a while. |
|
NCSU
Full Member
'94 Pickup 22RE, 2"body lift, 33x12.50 BFG A/T's, RS5000's, K&N, Airbox mod, Flowmaster-2.5"pipe
Posts: 245
|
BG44K
Jan 8, 2004 21:03:59 GMT -5
Post by NCSU on Jan 8, 2004 21:03:59 GMT -5
|
|
|
|
BG44K
Jan 9, 2004 11:51:34 GMT -5
Post by 85yodaman on Jan 9, 2004 11:51:34 GMT -5
Its good stuff, I use it all the time. BG rep came to my shop and we tested some of their products. They gave free samples to us to try and it does work.
I really like the oil additive, we did a bearing load test on it.
Meaning two spinning roller bearings forced together with a torque wrench to test the load at which the product begins to smoke, scar the bearings, or completely stop spinning.
Tried Several other products during the test but the BG came out on top. We could not get it to smoke or even stop the bearnigs. No matter how much of a load we put on it. We broke the torque wrench trying to make it fail.
Anyways GOOD STUFF
|
|
|
|
BG44K
Jan 9, 2004 20:54:24 GMT -5
Post by 4xfred on Jan 9, 2004 20:54:24 GMT -5
;D 85, who set up the test? Better yet, was each test run on different bearings? I've seen this before. Not impressed. Think: "live infomercial". Later...
|
|
[/glow]
