racer85304
Full Member
89 toyota pickup, Aussie locker. MC4.7 gears
Posts: 135
|
locker
Sept 11, 2003 18:31:25 GMT -5
Post by racer85304 on Sept 11, 2003 18:31:25 GMT -5
Does any body know of any place to get a locker for around 200 or less.
will a toyota 8 inch v6 locker work for a toyota 8 inch 4cly. i can find the lock right locker for the v6 diff for 203 but the cheapest 4 cly is 244.
thanks
|
|
racer85304
Full Member
89 toyota pickup, Aussie locker. MC4.7 gears
Posts: 135
|
locker
Sept 11, 2003 18:33:12 GMT -5
Post by racer85304 on Sept 11, 2003 18:33:12 GMT -5
it is for a 8 inch 4cly diff
|
|
|
|
locker
Sept 11, 2003 19:34:26 GMT -5
Post by 4xfred on Sept 11, 2003 19:34:26 GMT -5
|
|
racer85304
Full Member
89 toyota pickup, Aussie locker. MC4.7 gears
Posts: 135
|
locker
Sept 12, 2003 0:59:41 GMT -5
Post by racer85304 on Sept 12, 2003 0:59:41 GMT -5
any body heard anything about the aussie locker or use it. i have read all the stuff on the pirate4x4 site about it. just wondering if anyone here has used it. i have only heard good stuff about them from people that have used them. so i probaly get one for my toyota in the rear. thinking about getting one for my toyota. they 199 untill oct 1st. www.offroadlockers.comthanks |
|
|
|
locker
Sept 12, 2003 10:09:36 GMT -5
Post by Sean on Sept 12, 2003 10:09:36 GMT -5
I only know what I've been following on Pirate like you, and I also plan to order one for my front before the price goes up. They look good so far, and who can beat that price.
|
|
racer85304
Full Member
89 toyota pickup, Aussie locker. MC4.7 gears
Posts: 135
|
locker
Oct 7, 2003 3:20:05 GMT -5
Post by racer85304 on Oct 7, 2003 3:20:05 GMT -5
well got my locker today(monday the 6th) and got it installed today. went good.
|
|
|
|
locker
Oct 7, 2003 12:18:56 GMT -5
Post by Sean on Oct 7, 2003 12:18:56 GMT -5
Cool! How much grinding/clearancing did you end up having to do?
|
|
racer85304
Full Member
89 toyota pickup, Aussie locker. MC4.7 gears
Posts: 135
|
locker
Oct 8, 2003 3:52:20 GMT -5
Post by racer85304 on Oct 8, 2003 3:52:20 GMT -5
well i did not do too much grinding. i had to make the opening next to the ring gear a square. instead of round. i also had to take a little off the walls.
|
|
|
|
locker
Oct 22, 2003 3:47:44 GMT -5
Post by toy94x4 on Oct 22, 2003 3:47:44 GMT -5
I've read many things about the aussie locker and ALL are good. The only problem seems to be getting them quickly but it doesn't appear to be their fault. I myself will be ordering one in a couple weeks and will update y'all when in, complete, and tested out. Good Luck on getting one for you.
|
|
|
|
locker
Oct 22, 2003 9:56:28 GMT -5
Post by Sean on Oct 22, 2003 9:56:28 GMT -5
My plans are on hold. I found out they are only making the locker for 4cly applications. The supplier in the states e-mailed me and said the V6 application would be coming out in the next few months. That's all and good cause the snow will fall soon here and that means I wont be tearing apart the front end unless I have no other choice.
|
|
