racer85304
Full Member
89 toyota pickup, Aussie locker. MC4.7 gears
Posts: 135
|
ratios
Oct 25, 2003 2:41:56 GMT -5
Post by racer85304 on Oct 25, 2003 2:41:56 GMT -5
hey would 5.43 in the rear and 5.38 in the front be ok to run. it will in 4x4 only in the dirt. it seems to be ok but not sure.
thanks
|
|
|
|
ratios
Oct 25, 2003 13:09:27 GMT -5
Post by snorkleman on Oct 25, 2003 13:09:27 GMT -5
Why are you using such a high gearing? The highest I ever hear about are 5.29's. Sure you could go up to 5.71's but the higher the gear the weaker it is going to be. Ratios differences are ok as long as your around .09 difference. More than that and your gonna be pushing it. I think you wouldbe ok...and keeping it on the dirt will work out better. Good luck.
|
|
racer85304
Full Member
89 toyota pickup, Aussie locker. MC4.7 gears
Posts: 135
|
ratios
Oct 25, 2003 14:18:42 GMT -5
Post by racer85304 on Oct 25, 2003 14:18:42 GMT -5
well the 5.43 would be in the back and the 5.38 would be in the front. i am getting a d44 from this guy for free and my friend has a nine inch in his backyard. i think i might try to run the 37 mtrs.
do you guys think i should go full width or stay with toyota axles.
thanks
|
|
|
|
ratios
Oct 27, 2003 17:01:00 GMT -5
Post by jerry92toy on Oct 27, 2003 17:01:00 GMT -5
i do know the v6 toyota rearend is a 1 ton
|
|
