|
|
Post by bowhunter2244 on Feb 2, 2008 18:18:17 GMT -5
Anyone ever replace a window regulator?If so how hard is it to replace?and what is involved.Thanks  |
|
|
|
Post by DeadlyPeace on Feb 3, 2008 2:05:40 GMT -5
It's simple. Roll the window down about half way and remove the 2 bolts to the window and remove it from the door. Could also just let it slide down inside the door and rest at the bottom. Then remove the 4 or 5 bolts to the regulator and remove it. Install the new one in the reverse order.
|
|
|
|
Post by bowhunter2244 on Feb 3, 2008 9:43:48 GMT -5
Thanks DEADLY PEACE.I'm going to give it a try this afternoon.
|
|
|
|
Post by cr884runner on Feb 3, 2008 10:50:22 GMT -5
Now this is for the door windows correct? I am having a problem in my 4runner where the rear window stopped working...
|
|
|
|
Post by DeadlyPeace on Feb 3, 2008 12:45:10 GMT -5
Yes this is for the doors.
For the rear window it's more then likely something the motor. Not sure about them, never had to deal with one. Would think if you pull the panel off you should be able to get the motor to test it. Worth a shot.
|
|
rsdan
Full Member
Posts: 116
|
Post by rsdan on Feb 3, 2008 16:40:39 GMT -5
On my rear window it was the relay behind the drivers door that quit working. After I replaced it it's worked fine ever since.
|
|
[/glow]