Brady
New Member
Posts: 22
|
Post by Brady on Dec 9, 2007 22:25:08 GMT -5
I was just wondering if anyone with a front winch bumper and an 8000 ld winch has any problems with the bearings going in the stock hubs. IFS and the straight axle as I plan to do a SAS in the future and dont want to have it work on one and not on the other. I have a 1992 truck ;D if you need to know that.
|
|
|
|
Post by rockcrawlintoy on Dec 9, 2007 23:40:44 GMT -5
should be fine. just keep up regular maintaince
|
|
|
|
Post by DeadlyPeace on Dec 10, 2007 12:30:25 GMT -5
Should be no problem, just make sure to tear down and check that everything is good on the the straight axle when you get.
|
|
chop
New Member
Posts: 22
|
Post by chop on Dec 10, 2007 13:23:00 GMT -5
92 cab and half, 4x4, 8000 warn winch, full front brush guard (installed when the truck had 300 miles on it) with 314,000 miles. original bearings, no problemo.
|
|
|
|
Post by Sean on Dec 10, 2007 16:04:38 GMT -5
Never had a problem all these years with the front Toy wheel bearings. Changed a few rears but the only fronts i bought was when i rebuilt the axle for the SAS 5+ years ago and that was only because i wanted everything new. The originals look fine and in retrospect i would save myself the 200 hun and reuse them if i could do it over.
Then again I service mine at least twice a year on average, depending on how much stuff i break that year.
|
|
Brady
New Member
Posts: 22
|
Post by Brady on Dec 23, 2007 14:31:25 GMT -5
Well ty, info helped, probably saved me 200 dollars, cause I have had other people tell me different.
|
|
[/glow]