|
|
Post by 94runnerj4 on Jan 3, 2008 17:20:16 GMT -5
Hi I have a 1994 4runner and i just recently had the rear third member replaced dur to a broken pinion gear. The new third member is supposed to be the correct one with the correct gears. But when I put the truck into 4 wheel drive low it feels like it wants to pull hard to the right and hop when I turn. Does this mean anything? Maybe it has a locker? Any help would be appreciated.
|
|
|
|
Post by fourwd1 on Jan 4, 2008 12:31:56 GMT -5
If you're in 4low on a dry paved surface, you will get some 'hopping' when turning from the drivetrain binding up
What was the source of the replacement diff? new from a dealer, used from a salvage yard? If used it could have an aftermarket locker.
The wrong ratio will also cause the drivetrain to bind up in 4wd.
|
|
|
|
Post by 94runnerj4 on Jan 5, 2008 12:58:42 GMT -5
The new diff. is from a salvage yard.
|
|
|
|
Post by bowshtr on Jan 8, 2008 9:28:57 GMT -5
|
|
|
|
Post by larry073 on Jan 9, 2008 11:30:20 GMT -5
nice little video that helps for a change.
|
|
|
|
Post by 94runnerj4 on Jan 23, 2008 21:05:00 GMT -5
Thanks for that video I will try that out next chance I get!
|
|
