|
|
Post by Justin on Feb 12, 2008 15:57:01 GMT -5
When I lock my hubs in, the passenger side makes grinding noises when I hit a bump in the road. I took the hub off and cleaned and greased it now its not as loud but there is still a noise if i hit a bump.
|
|
|
|
Post by fourwd1 on Feb 12, 2008 20:31:34 GMT -5
When you lock the hub, things start rotating that weren't before.
Could be CV joint, wheel bearings ...
|
|
|
|
Post by Sean on Feb 13, 2008 18:16:34 GMT -5
I would suspect a cv joint. Make noise when you try a tight corner?
|
|
|
|
Post by Justin on Feb 15, 2008 12:51:20 GMT -5
Yes the CV does make noises in tight cornering. I didn't even think of that. Will an axle out of a 89 auto fit my 86 manual?
|
|
|
|
Post by Sean on Feb 15, 2008 17:32:48 GMT -5
I beleive it will. All passenger side IFS axles are the same 86-95. Its the driver side that can differ depending on whether it has ADD or not.
|
|
|
|
Post by Justin on Feb 16, 2008 17:34:43 GMT -5
OK cool i have a chance to pick up an 89 runner for $100 so there is the my axle.
Thanks Guys
|
|
