|
|
Post by mike11 on Feb 17, 2008 20:13:39 GMT -5
ok i was driving home today and i hit a huge pot hole water went every where and i thought nothing of it. i was on an icy road and i decided i needed four wheel drive i put it in and my truck stalled. so i put it in park and started it agin. it didnt seem like it was running right it had no power. once i got on the clear roads i took it out of four wheel drive. and first gear and second seemed to shift fine but once i got to like 25mph it would not shift. i let off the gas and then it shifted but it had like no power and i could only go like 30. i dont no what the problem is. I need help please!! thanks for your time.
|
|
|
|
Post by Sean on Feb 17, 2008 20:43:59 GMT -5
Is it the motor or the tranny? Check your air cleaner, ive had them ice up before.
|
|
|
|
Post by mike11 on Feb 17, 2008 20:55:32 GMT -5
i think its the tranny. but i dunno cuz i tried driving it agin and when i pulled into my driveway it stalled
|
|
|
|
Post by bowshtr on Feb 18, 2008 18:39:23 GMT -5
Is the problem still going on?
I had a similar issue happen when my O2 sensor crapped out.
Try to check and see if you are poppin any trouble codes.
|
|
|
|
Post by mike11 on Feb 18, 2008 19:33:57 GMT -5
The mass air flow sensor came loose. When i put the air intake in i must not of put the clip on the sensor. and when i hit the pot hole it just moved a little. i put it back on and got a clip and it runs great. Thanks everyone!!
|
|
