|
|
Post by yotanut7 on Mar 12, 2008 13:07:46 GMT -5
I want to make a new set of shifters for my 87. I just want to replace the parts that come out of the boots. Do both the trans and t case shifters just unscrew from the part that actually goes into the trans / t case? It is the 22r trans and t case if that helps. Thanks
|
|
|
|
Post by seth999 on Mar 13, 2008 9:25:57 GMT -5
They look like this  I would just cut it off and weld the new part on somewhere below the boot where it couldnt be seen |
|
|
|
Post by yotanut7 on Mar 13, 2008 9:28:43 GMT -5
Awesome, thanks!
|
|
|
|
Post by bowshtr on Mar 15, 2008 21:17:41 GMT -5
My buddy make some shifters out of a Budlight bar tap and i wanna say new castle for his t-case. It was pretty sweet. On my car i used deer horns and made a badass shifter.
|
|
|
|
Post by seth999 on Mar 17, 2008 8:25:48 GMT -5
yeah the bottom 5 inches of an elk antler works really good I had that on one of my trucks
|
|
