|
|
Post by myrunner94 on Mar 25, 2008 21:45:23 GMT -5
OK i had to do a motor swop in my 94 runner ........ ever since then the checking light comes on and when i pull the code it give me a 71 ( egr system , egr temp sensor or circuit, egr bvsv or vsv or circuit) i hve changed the egr and the temp sensor and it still come on what do i do  |
|
4x4banger
Full Member
I drive a Toyota, YAYYYY!!!!
Posts: 157
|
Post by 4x4banger on Mar 26, 2008 19:22:42 GMT -5
This may be a stupid question, but did you erase the trouble codes when you did this? If not, pull the EFI fuse out for 30 seconds to clear the codes. Then see if it comes on again.
|
|
|
|
Post by myrunner94 on Mar 26, 2008 20:13:55 GMT -5
yeah i have reset the code and it does good till i hit a hill then it comes on i can run around at 70 all day but i hit a hill and if it dont come on on the up side it come on on the down side
is a 3.0
|
|
