4x4banger
Full Member
I drive a Toyota, YAYYYY!!!!
Posts: 157
|
Post by 4x4banger on Mar 26, 2008 19:19:27 GMT -5
I recently acquired an 86 p/u that was converted from EFI to carb. I ditched the aftermarket carb that had a manual choke, and put on a stock one with electric choke, but I'm not sure how to wire it. Even though the truck was EFI, is there still wiring somewhere for a choke? Or do I have to wire it myself? If so, does anyone know how to wire it? It has a plug coming off with four wires: one white w/black stripe, one red and two black. Thanks.
|
|
4x4banger
Full Member
I drive a Toyota, YAYYYY!!!!
Posts: 157
|
Post by 4x4banger on Mar 31, 2008 14:33:01 GMT -5
By using a multimeter on a friend's vehicle I've deducted that both black wires go to ground, the white with a black stripe needs a switched battery + supply. I Still don't know that the red wire is for. It comes from the black plastic thing on the back of the carb that is part of the choke assembly. Does it also need a + battery supply? Does it take a ready from a sensor somewhere?
|
|
|
|
Post by fourwd1 on Mar 31, 2008 19:19:09 GMT -5
See my answer in your duplicate post.  |
|
rsdan
Full Member
Posts: 116
|
Post by rsdan on Apr 1, 2008 20:30:16 GMT -5
Oh you know duplicate, triplicate...everyone needs there own copy.
|
|
