|
|
Post by duanedeidre on Mar 15, 2004 22:07:20 GMT -5
i have a vibration at 30 to 40 mph when take truck out of gear  (the truck 03 v6 5speed taco ext cab 4x4 sr5 20k miles) and i think the rotors are warped but toyota says nope  just fine but they do shake the streering wheel at times can anyone help here? duane  |
|
|
|
Post by Hoodlum on Mar 23, 2004 10:19:28 GMT -5
have your tires re-balanced if that doesn't fix it have your steering and axle components checked
|
|
|
|
Post by redtoy92 on Mar 24, 2004 10:25:41 GMT -5
i have a vibration at 30 to 40 mph when take truck out of gear (the truck 03 v6 5speed taco ext cab 4x4 sr5 20k miles) and i think the rotors are warped but toyota says nope just fine but they do shake the streering wheel at times can anyone help here? duane 1.tires balanced 2. do you have any mud stuck inside of the wheels? 3. check all steering and driveline parts the may become loose. |
|
|
|
Post by duanedeidre on Mar 24, 2004 23:04:34 GMT -5
yeah i know i need to balance the tire and rotate them doing that this week
but another thing does anyone's tires on the rear wear on the inside mine do no matter how much air is in the tire my 95 aco did the same
i have put 32 psi and 35 psi and still the rear will wear a line on the inside right down the middle strange very strange "i have 16's on this truck" and they are factory
can you help here ?
oh teah they got about 20k on them the front prefect
duane
|
|
|
|
Post by gotlifted on Dec 15, 2004 17:38:39 GMT -5
the tire ware prob.can be due to impropper inflation.if your running a 265/75/16you need to be running 26 F&R if your running a set of s rated tires .You should run 26 also if your vehicle is a standered cab .If your running a set ofof t rated tires it should run 26 in the front and 29 in rear.This could also be your vibration problem.
|
|
