can I lift again

[hunter]

Hey
I want to lift my 95" tacoma another 3in. I already have the cornfed 3in. lift and a 3in" performance accessories body lift on and am wanting to add the fabtech 3.5 in. coil over lift to it for a total of 9in. of lift. I was just wandering if I did this if my geometry would be allright up front or would it be to stressed and start breaking stuff. oh yeah I also have a 3in. diff. drop on front to correct the cornfed lift. any input would be appriciated.
Thanks

[BurntOrngeLonghorn]

You have a 1in. diff drop if you got the diff drop from cornfed.

I don't think the cornfed spacers work with the fabtech coilover....at least i've never heard of it being done before...doesn't sound like a good idea.

You could replace the 3in with a 6in complete kit....and then achieve your 9 in.....

that's going to be your best bet

[hunter]

:'(Thanks for the input but I'm tryin to stay away from the 6in complete lifts mainly due to the fact I can't afford one right now. If the spacer and coil overs arn't compatible then I guess I'll keep savin till I can do a SAS. If any one else knows another way for me to lift the front another 3in. I would greatly appriciate the input.

[Mike Kelly]

I don't think another 3" on top of the corfed is a good idea. With your cornfed, you get the 1" drop like Burnt said, so with an additional 3", you would need a 4" drop. That is a BIG drop and personally, unless you fabbed up something monsterous, it may be unsafe.

To do it on the cheap, you *could* add an additional 3" body lift - but this is highly unsafe - and not recommended.

Save up for the SAS if you don't have the $$ to do the 6" replacement.

Good luck!