|
|
Post by philpayne on Aug 19, 2006 9:53:21 GMT -5
is it possible to swap these two with out too much trouble? what would I need to get this job done?
my friend has a beat 2.7 that has some blow by and would like to upgrade to a 3.4
does he just need the ecu and engine or does he need more?
thanks
Phil
|
|
|
|
Post by Hoodlum on Aug 21, 2006 13:17:54 GMT -5
is it possible to swap these two with out too much trouble? what would I need to get this job done? my friend has a beat 2.7 that has some blow by and would like to upgrade to a 3.4 does he just need the ecu and engine or does he need more? thanks Phil You will need the matching wire harness as well as the transmission. I'm not certain as far as the t-case weather it will match up or if you'll need an adapter. |
|
|
|
Post by philpayne on Aug 21, 2006 22:45:01 GMT -5
that sucks. I mean i found a donar truck but its automatic and I really don't feel stripping the truck would be worth it.
thanks for the help
phil
|
|
|
|
Post by Hoodlum on Aug 22, 2006 9:12:35 GMT -5
You could rebuild the 2.7 when you strip it down take the block to a machine shop and have them deck it .20 DO NOT have them bore it just have the cylinders honed. Boring the 2.7 isn't a good idea you don't gain enough to give up the durability. Have the head ported and decked .10(just enough to true the mounting surface) You'll be amazed at what the 2.7 is capable of.
|
|
|
|
Post by philpayne on Aug 24, 2006 22:13:49 GMT -5
I'll look into that and see what they say. thanks for giving me some options
later
phil
|
|
