riseagainst88
Full Member
The Good Times Come and The Good Times Come
Posts: 150
|
Post by riseagainst88 on Oct 10, 2007 17:45:48 GMT -5
I have been interested in getting a 99 and up 3.4 taco extd 5 spd w/ trd locker. Getting the All Pro SAS kit, Sky's Manufacturings Tacoma Fabricated front axle stuffing w/bobby long's axle shafts. What other internals will I need be sides 3rd's? Probably run 5.29 or 4.88 w/35's or 36's. In the far future a trd s/c w/ 7th injector. Tell me what you'll think. Or any suggestions!
|
|
|
|
Post by Hoodlum on Oct 12, 2007 9:06:45 GMT -5
If you plan on a S/C and 7th injector kit. That's where I would start. It's gonna be the biggest expense and it takes some time to dial in the system. While your doing that you can start picking up the other parts here and there. It's a mistake that I made. I wish I had done the motor first then the other mods. I got most of the way through the build then had major motor problems. Which made it very difficult to finish the rest of the build. I ended up being over a year behind where I wanted to be with this project. just my .02 For your 3.4 check out this company. No one knows more about the 3.4 motor better than these guys. Gadget has one of the fastest 3.4's on the right coast and help build the fastest one in the country which is located in CA. Gadget is a great guy to talk with as well as being able to build a very reliable set up. www.urdusa.com/ |
|
riseagainst88
Full Member
The Good Times Come and The Good Times Come
Posts: 150
|
Post by riseagainst88 on Oct 21, 2007 20:42:25 GMT -5
Yes I have geard of urd before I chacked them out a while, back I would probably go w/ their 7th injector kit and possibly their fuel upgrade kit. I would really like complete the SAS first w/minor engine up grades then go with the super charger and accessories. I am thinking around 7" of lift with around 35's to 37's we will see when it happends. If any one has any more input that would be sweet.
|
|
riseagainst88
Full Member
The Good Times Come and The Good Times Come
Posts: 150
|
Post by riseagainst88 on Nov 15, 2007 18:11:49 GMT -5
I have begun searching for a solid Taco, I am still in the air about which front axle I am going to use? I know the waggie is a close fit but not sure if I wanna go that route.
|
|
riseagainst88
Full Member
The Good Times Come and The Good Times Come
Posts: 150
|
Post by riseagainst88 on Feb 17, 2008 12:22:37 GMT -5
|
|
|
|
Post by Hoodlum on Mar 18, 2008 10:08:45 GMT -5
The link isn't working..
|
|
