Kpooch75
Junior Member
Forget the naysayers 'cause they don't mean a thing.
Posts: 62
|
Post by Kpooch75 on Apr 21, 2004 15:27:38 GMT -5
Will I need to make any other modifications to my 4runner if I put on a 2'' coil spacer. I have the OME coils and shocks but I'm looking for just a little bit more height. It seems like I've heard something about needing new brake lines or fuel lines or something. Thanks.
|
|
|
|
Post by Sean on Apr 21, 2004 18:48:48 GMT -5
Fuel lines run down the frame so nothing you do to the suspension is really going to effect them. For the rear brakes their is a soft line between the LSPV and the axles hard lines. With enough lift this line has to be replace with a longer one, but I highly doubt 2" is going to be a problem.
|
|
imroc
New Member
Posts: 17
|
Post by imroc on May 14, 2004 0:07:16 GMT -5
|
|
|
|
Post by Hoodlum on Jun 10, 2004 11:17:35 GMT -5
on coil spacers you don't have to worry about anything unless you plan on going over 3'' total lift then you'll have to replace these things
|
|
|
|
Post by 4x4nala on Nov 16, 2005 12:10:23 GMT -5
If you are close to 3" I highly reccommend the panhard bar relocate kit that NWOR has?? might be downey.....But it was a must on mine when I had 3" coils made.
|
|
