|
|
Post by mudbogger on Mar 4, 2004 22:14:44 GMT -5
WILL MY PINION BEARING KEEP GOING BAD BECAUSE I HAVE A 9 INCH LIFT
|
|
|
|
Post by iluvdrt on Mar 28, 2004 23:38:49 GMT -5
lets see. first of all dont type in caps, it is considered yelling in a forum.
to answer your question, it might. if your driveline is too steep(more than 20 degrees i think it is) it could because there would be excessive vibrations due to the ujoint angles.
|
|
|
|
Post by snorkleman on Apr 21, 2004 13:26:28 GMT -5
Dude if you have 9" of lift i would be interested in seeing what kind of lift you have got on it. With that much angle on the driveline you might have to rotate the pinion to decrease the angle.
|
|
|
|
Post by DeadlyPeace on Apr 21, 2004 14:12:24 GMT -5
I only got 8" of suspension lift and I knew I had to rotate my axle. Unfortunately I procrastinated on doing it for about a year and when I did get to it I noticed my pinion was already starting to wear. $400 down the drain. 
|
|
|
|
Post by Hoodlum on Apr 21, 2004 14:34:09 GMT -5
There is a 9" suspension lift for toyotas I had a print out about it but lost it and can't find it on the web again I came across it when I was looking for a replacment cat I'm still trying though
|
|
[/glow]
