|
|
Post by wickedyota97 on Mar 24, 2007 21:28:59 GMT -5
I'm doing a SAS swap on a 1995.5 Tacoma. Anyone know the measurements from the front body mount to the first cab mount. and the center of the hub from one of those body mounts? and any other advice or tips would be greatly appreciated!
|
|
|
|
Post by stev0454 on Mar 25, 2007 9:02:21 GMT -5
i have an 02 i'm pretty sure it's the same body style. and i'm running 33 bfg at and they only rub slightly at full turn. I'm also running 3" lift. But i'm rubbing the frame not the fenders so it's a little more coplicated then cutting the fenders. I'm still working on how i'm going to fix it. I'm either gunna cut the frame and weld a little indention in or buy new rims with a better offset
|
|
