|
|
Post by Surfturtle on Oct 23, 2003 0:13:55 GMT -5
I just bought a 1993 X Cab with 31.5 tires on it.
They are a bit worn so I have to guesstimate on clearances but it seems like 32's would fit without rub.
The truck is stock no lift no cutouts. Anyone know some more about this? I always run BFG's most likley it will be AT/KO's going on.
|
|
Colotoyboy
Full Member
1990 Toy 4x4 pickup, exhaust, Amsoil(airbox mod) 31'' BFG Muds, Rancho 5000's, Hella 500's, Cobra CB
Posts: 173
|
Post by Colotoyboy on Oct 23, 2003 11:57:04 GMT -5
I also have a pre-tacoma that i want to run 32's on. I have run 31's like you and by looking had plenty of room. I hear you can run 32's no problem, rubbing on the inside when u turn all the way, maybe. Just crank your front t-bars an inch if it does, my guess, it wont. Should run em with little or no problem. Hope somebody else here has and can help us more.
|
|
|
|
Post by Smithcrf on Dec 5, 2003 22:58:56 GMT -5
32's will fit fine if you're wheels don't have too much offset or are too wide. I know you can fit them easily on stock wheels. If you're wheels are not wider than 8 inches then you should be fine. I am running 32 bf muds on a 10 inch wheel and i just cranked the bars about 1 1/2 inches with very little rubbing. Hope this helps.
|
|
