|
|
Post by siambxr on Jun 18, 2005 20:23:12 GMT -5
Thinking of going with the American Racing chamber wheel ( dark grey teflon coated ). 16x8 off set of plus 20 I guess it equals 5 1/4 in the back side. any opinions if this is a siutable wheel ?
Lift kit I'm thinking of is just a 2 1/2 ".. specs say you can use 32x11.50.16 tire.. inputs folks... ?
|
|
hossmaster
Junior Member
02 dbl cab/ 05 4runner
Posts: 57
|
Post by hossmaster on Jun 22, 2005 1:27:59 GMT -5
Make sure that you do your math about the backspacing. The newer trucks can get a bit tight in the wheel well, as well and the upper A-arm is a different design and with a rim that is greater bs might rub that. I know that the factory rims for the 01-04 is 4.5". Just test your rims and see what you have compared to the new one. You probally don't want to go closer to the truck, especially if you want to go up a size or two.
|
|
|
|
Post by conductorguy on Jul 3, 2005 23:09:43 GMT -5
I heard that u can spray bedliner on your wheels and it looks just like the teflon coating, whats up with that anyway its not like i want to use my wheels to cook with....lol
|
|
hossmaster
Junior Member
02 dbl cab/ 05 4runner
Posts: 57
|
Post by hossmaster on Jul 4, 2005 1:27:41 GMT -5
Teflon is very a slippery compound. Imagine how easy it is to self clean mud or snow while on the trail or how easy it will be to clean once home.
|
|
