Will Stock Work?

highrevz
Full Member

Posts: 194

Will Stock Work? Oct 25, 2005 20:13:46 GMT -5

Quote

Post by highrevz on Oct 25, 2005 20:13:46 GMT -5

I've been running a 33x12.5-15 (10 inch wide wheel) on my '93 pickup for a while with a 3"bl and 1.5-2" torsion crank without any rub. however, I went through both tie rod ends, 2 idler arms, and a CV boot this summer. In effort to keep from braking front end parts I went back to stock height on the torsions. My question is, can I go back to stock Toyota steel wheels with these (15X6J RIMS?) tires. Backspacing? Too narrow of rim for 12.5 tire? THANKS

Hoodlum Global Moderator Scavenger Extraordinaire aka Parts Pimp Supoorting single mothers one dollar at a time Posts: 2,377	Will Stock Work? Oct 26, 2005 9:05:09 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Hoodlum on Oct 26, 2005 9:05:09 GMT -5 YES a 15x6 is to narrow of a rim for a 12.5 wide
	As seen in Off-Road magazine Feb. of '07 Life is tough......and even tougher when your stupid! kajobuilt.com/ www.midatlantictoyotacrawlers.com rightcoast4x4.com/ '86 4Runner,DD (bone stock) '99 Tacoma,fully capable excursion rig

highrevz Full Member Posts: 194	Will Stock Work? Nov 22, 2005 0:51:34 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by highrevz on Nov 22, 2005 0:51:34 GMT -5 That's what I thought, Damn! And btw Hoodlum, It was me after this summer that was wondering "What the hell just happened" Thanx.

Post by highrevz on Oct 25, 2005 20:13:46 GMT -5

Post by Hoodlum on Oct 26, 2005 9:05:09 GMT -5

Post by highrevz on Nov 22, 2005 0:51:34 GMT -5