Wheel/Tire matchup?

gadawg
New Member

Posts: 1

Wheel/Tire matchup? Oct 24, 2006 1:42:19 GMT -5

Quote

Post by gadawg on Oct 24, 2006 1:42:19 GMT -5

Howdy all, just signed up and wanted to get some opinions on a wheel/tire match up for my 96 tacoma project i just bought.

it's soon to be sitting on a 3" body and 2.5" suspension lift and i was wondering what you guys would reccomend as a good set up wheel/tire wise for that sort of suspension.

any off road running i do is in the lowcountry of south carolina (charleston area) and it is pretty flat out here, so it doesn't take alot of abuse.

thanks for your help!
-GD

91toytrck New Member Posts: 44	Wheel/Tire matchup? Oct 28, 2006 4:12:50 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by 91toytrck on Oct 28, 2006 4:12:50 GMT -5 I would say that losing the body lift, stock rims, and 33x10.50s would be a good route.
	"Lift as much as needed, but as little as possible" 91 pickup xcab 3.0L 5spd red Hella H4 Headlights / Clear Corner & Bumper Lenses / Brightened Up Taillights & Brighter Bulbs / Cootees ISR Mod / K&N Filter / High-Flow Cat / 18" Magnaflow Muffler / 2.25" Pipe / 33x10.50 BFG AT / Stock SR5

norcalyota Senior Member Posts: 394	Wheel/Tire matchup? Nov 4, 2006 22:29:26 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by norcalyota on Nov 4, 2006 22:29:26 GMT -5 32x11.5's and ditch that body lift
	J HATCH

speedy Senior Member Work hard, Play hard Posts: 404	Wheel/Tire matchup? Nov 7, 2006 7:17:10 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by speedy on Nov 7, 2006 7:17:10 GMT -5 33 12/50's some decent offset and ditch 1 to 2 inches of the body lift.
	The more you do, the more you need to do to make the stuff you did work.

Post by gadawg on Oct 24, 2006 1:42:19 GMT -5

Post by 91toytrck on Oct 28, 2006 4:12:50 GMT -5

Post by norcalyota on Nov 4, 2006 22:29:26 GMT -5

Post by speedy on Nov 7, 2006 7:17:10 GMT -5