|
|
Post by 98taco on Apr 11, 2008 20:33:39 GMT -5
i just bought a 98 tacoma sr5 v6 and i have just installed a 3 inch suspension lift.. as of now i have a 265/75/r16 on a 8 1/2 inch wheel.. they are too small.. i'm new to the taco family so i am asking for advice.. just how big can i go without rubbing?
|
|
|
|
Post by clemsonrules on Apr 24, 2008 21:41:17 GMT -5
i would go 33x12.5
you might rub a little but it will only be when you turn all the way
|
|
|
|
Post by uscgsnipe on Jun 30, 2008 20:05:18 GMT -5
The rubbing sucks. I have an 85 so I dont have that problem with 33's but my friend has an 07 Tacoma with 33x12.50 and the rubbing is very annoying. He has a three inch lift. I would recommend either going with a smaller tire or getting a bigger lift unless the noise does not bother you.
|
|
|
|
Post by bluesman on Jul 7, 2008 11:36:58 GMT -5
How big can you go with a stock setup? I plan on adding a 2 or 3 inch lift later but that's in the future.
|
|
|
|
Post by toorisky on Sept 21, 2008 22:11:53 GMT -5
dont forget wheel spacers as a fix also...just be sure they are made of aircraft grade aluminum from a reputable place, make sure you tighten to 90ft/lbs and check every now and again...
|
|
