|
|
Post by 4xfred on Aug 12, 2003 19:27:00 GMT -5
|
|
|
|
Post by iluvdrt on Sept 2, 2003 23:45:44 GMT -5
looks good.
|
|
|
|
Post by 4xfred on Sept 3, 2003 18:25:06 GMT -5
;D Thanks!!! I took it thru some mudholes/creek bottoms near the house & nothing hit. So far so good! Now, saving up for the Badlands Bumpers & 4.88's. Later...
|
|
|
|
Post by 91Runner on Mar 7, 2004 7:53:24 GMT -5
Looks good.... I only have one question...... How much trimming, and banging did you have to do to clear those? I was thinking of putting on the same size tires...
|
|
|
|
Post by DeadlyPeace on Mar 7, 2004 15:22:57 GMT -5
Nice rig 4x. Can't wait till mine looks that shinny. Hopefully this summer. Been thinking about doing a Midnight Blue with Metallic Blue accessories, but might do something with Black instead.
 Decisions decisions decisions, how they they can effect the mind.
Just have a few more things to do before painting.
Like to see how yours looks when you get that bummper on. Any other plan for it yet?
|
|
|
|
Post by 4xfred on Mar 7, 2004 22:14:39 GMT -5
;D Thanks Deadly! ;D BTW, that's factory paint. More mods in my head than my bank account has$$$! For now, all my plans are gone due to my work car blowing up (& I mean oil & coolant everywhere blowing up) on the way home from work last Mon. 91, the 10.5's are an easy fit. I beat down the body seam, trimmed the front valance & a little bit in the front of the rear tire. No rub at all. Later...
|
|
|
|
Post by DeadlyPeace on Mar 7, 2004 23:13:12 GMT -5
More mods in my head than my bank account has$$$! |
|
|
|
Post by 36onatoy on Mar 15, 2004 10:55:38 GMT -5
nice looks good, a bit tight i bet, did you pound the fire wall back, i know a guy who pounded his back 2 inches so he could fit a 35, but he was crasy and rolled that thing down a hill.
|
|
|
|
Post by 4xfred on Mar 16, 2004 21:48:21 GMT -5
;D We like Em' tight!  Seriously, they fit well. I do carry a cordless sawzall & BFH in case mods are needed. Later... |
|
|
|
Post by calgary4runner on Apr 23, 2004 1:13:57 GMT -5
i just put 33 x 12.50's on my '92 4 runner without any lift and everything was fine... until i went to steer, so i had to bring out the sawzall and start trimming back parts. i finally got it to the point where i can steer around corners tightly without rubbing. At this point i don't trust the clearance taking it back out into anything too rough until I get my parts to raise it. I wish I knew haw to post pictures, though, because it sure looks awesome!!
|
|
|
|
Post by toyotaman on Jul 2, 2004 12:01:23 GMT -5
I've got an '84 pickup that I run 33x12.5s on without any lift. I think the previous owner trimmed the back of the fender opening just a bit. The only rub I get is when I am turned sharp and flexed to the max.
toyotaman
|
|
[/glow]