|
|
Post by yotaman94 on Oct 6, 2003 23:34:01 GMT -5
I need advice on how to lift my 94 4x4 2-3" without breaking the bank. I would like to have decent ride quality. I have 31/10.50 with a little room but im gettin 33/ 12.50. Torsion bars seem like the way to go for cheap. Any info would be great. Thanks Yotaman94
|
|
Colotoyboy
Full Member
1990 Toy 4x4 pickup, exhaust, Amsoil(airbox mod) 31'' BFG Muds, Rancho 5000's, Hella 500's, Cobra CB
Posts: 173
|
Post by Colotoyboy on Oct 9, 2003 14:09:21 GMT -5
I have a 90' and I have been wanting to get 2-3'' out of it also. I looked into the torsion bar thing and cranking them more than 1'' isnt good, it hurts your flex real bad too. So i think im gonna crank mine an inch in the front and go with a 75$ 2'' body lift, with a 1'' block in the rear i snagged for 10$. thattll give me a 3" under 100$. Good luck, let me know what you plan on doing.
|
|
ksrunner
Junior Member
85 4Runner
Posts: 66
|
Post by ksrunner on Jan 22, 2004 15:33:35 GMT -5
You might 'shave' your stock bumpstops to regain some of your lost travel from cranking the bars, or you can buy new low profile ones.
|
|
|
|
Post by 4xfred on Jan 22, 2004 21:43:40 GMT -5
|
|
