|
|
Post by carlos4x4sand on Oct 14, 2003 23:56:29 GMT -5
Im thinking about doning a SAS on my 88' 4Runner, i wanna run 39' boggers. The thing is cant put a body lift on my truck cause is not offered anywhere. So i need all the syspension i can get, If i add 12'' or 10'' chevy springs, would this be enough or perfect, and would the fit in the stock spring hangers? Any kind of suggestions are helpful.
|
|
|
|
Post by klif01 on Nov 18, 2003 13:47:39 GMT -5
Go read stuf on www.pirate4x4.com in the bulitin board, search for chevy spring swap. You will not be able to fit any bit of chevys in stock locations. I cut all the old stuf off. Chevy springs are 63" long and the front hanger is moved9-11" forward and the rear needs to be moved back about 4" and dropped somehow. People have done a double shackle to get the lift desired, but I did a 2" square tube welded to the frame with the spring hanger welded to that and an 8" shackle off it. This gave me about 4 1/2" of lift. Honestly you don't need 12" of lift, thats insane and you WILL roll. If you want to fit 39's do the chevy swap and sas with all pro 5 1/2" tires, then you need to trim the fenders a LOT and you will fit the tires. |
|
|
|
Post by carlos4x4sand on Nov 18, 2003 13:51:06 GMT -5
Thanks alot but i am keeping the IFS for now and i found a way to run my 39s even with out trimmin. Again thanks
|
|
