DG
New Member
Posts: 20
|
Post by DG on Sept 2, 2004 0:16:59 GMT -5
I have a 90 Toyota pickup. How many inches do I need to be able to fit 35x12.50 tires? How many for 33x12.50 tires?  |
|
|
|
Post by Sean on Sept 6, 2004 2:27:58 GMT -5
4" kit for 35's maybe some fender trimming. For 33s you can get away with a 1" body lift with some trimming or a 2-3 body of suspension lift.
|
|
DG
New Member
Posts: 20
|
Post by DG on Sept 6, 2004 16:18:02 GMT -5
Perfect. I was looking at a 4" Pro Comp lift and didn't know if I could fit 35's or not. I am in desperate need for new tires now. I will have to get 31's b/c I am still saving for the lift. Do you know of any 31x11.5 or 31x12.5 radials? |
|
|
|
Post by Sean on Sept 6, 2004 21:45:59 GMT -5
|
|
|
|
Post by greenhead on Sept 6, 2004 23:06:31 GMT -5
super swamper makes both sizes in a radial
|
|
DG
New Member
Posts: 20
|
Post by DG on Sept 8, 2004 17:53:34 GMT -5
Thanks for the help!! You guys have an awsome web site!!!  |
|
|
|
Post by 4TACXOMA4 on Sept 9, 2004 11:38:29 GMT -5
My buddy is running 7 inches of lift, 4" susp 3" BL, with 35's and it looks good and he will never rub.
|
|
DG
New Member
Posts: 20
|
Post by DG on Sept 10, 2004 0:31:53 GMT -5
How many miles do you think that you will get out of your SSR's? I like those a lot and was wondering if they have a good wear rating. |
|
|
|
Post by 4TACXOMA4 on Sept 10, 2004 14:03:40 GMT -5
I have had them for a year now, and I try to rotate them every 5-6k miles. So far they haven't shown much sign of wear, and they wheel like crazy. I like how they look on my truck too with the big side lugs.
|
|
DG
New Member
Posts: 20
|
Post by DG on Sept 10, 2004 17:21:00 GMT -5
Those are some awsome tires!!! I looked at your picture page and your truck looks really good. I am looking at 31's, but I like the 12.5 width. Your truck only has a 3 inch suspension lift with another 3 inches of body? It looks bigger. That is the look I am going for when I order my lift. What kind of lifts do you have? |
|
|
|
Post by 4TACXOMA4 on Sept 23, 2004 19:51:34 GMT -5
Right now I have a 3" PA body lift with the 3" Revtek lift stacked on top of it. However, once all my lift components arrive I will be taking off the Revtek, and then I will be running the Fabtech 6", OME 881's, and the 3" BL. So when I'm done I will have 10-11" of total lift.
|
|
