|
|
Post by chromecowboy on Dec 14, 2004 20:57:58 GMT -5
I've got a 4" suspension lift that uses blocks in the back, however I'm going to buy new springs to replace this system that give 4" of lift. What springs are the best as far as giving a smooth ride that isn't so stiff?
|
|
|
|
Post by Sean on Dec 15, 2004 11:37:29 GMT -5
|
|
|
|
Post by DeadlyPeace on Dec 15, 2004 13:11:17 GMT -5
All Pro also has some www.allprooffroad.com/suspension.htm
I thinkthe Marlin springs are better, but I just thought I'd throw you out more options.
AOR are damn good, but they do dig into the pocket book. www.aor4x4.com/orbit-eyepoly-eye.htm
I also have the Chevy springs with 4" blocks and I'm very pleased with them. I haven't had any problems with them what so ever, but do plan on going to the AOR springs when time and money are being nice to me just to get rid of the blocks.
|
|
|
|
Post by Sean on Dec 15, 2004 16:52:40 GMT -5
Just want to point out the AOR springs are made by Alcan. Though you can only purchase the orbit eye springs through AOR, you can get the exact same spring without the orbit eye direct from Alcan.
|
|
|
|
Post by masterwacker on Dec 24, 2004 0:09:48 GMT -5
I would go with Alcan. When you order the springs you can tell them how much lift and what load rating you want on them. Meaning if you are always carrying 300 lbs in the back of you truck they will configure the springs to be 300 lbs heavier duty than just a lifted spring. Keep in mind thought that if you don't have the 300 lbs in the back they will be a lot stiffer ride.
|
|
[/glow]