snowxman41
New Member
If its not broke, you dont use it right.
Posts: 7
|
Post by snowxman41 on Feb 18, 2005 17:10:03 GMT -5
I want to put a 4" supension lift on my truck because i also have a 2 inch body i already have and need to put on it. Im only 17 and dont have tons of money, and i was wondering whats the cheapest lift out there. I have a 1983 jeep thats has more toys on it than i can write down in this page and it is a lot cheaper to do stuff to that. Mine has IFS and i guess i was just wondering what is the cheapest lift i could get
thanks zack
|
|
|
|
Post by Sean on Feb 19, 2005 12:50:29 GMT -5
The cheapest route is to look for a used lift for sale on a site like this one or another popular toyota board like Pirate4x4. Loads of people are going SAS and end up dumping there lifts for cheap.
|
|
|
|
Post by rockcrawlintoy on Feb 21, 2005 13:14:07 GMT -5
ya i sold my IFS lift for 250 to a guy on pirate. cheapest is to buy used. to buy new remember u ge what u pay for
DRew
|
|
|
|
Post by 94cnytoy on Feb 28, 2005 19:30:41 GMT -5
don't want to be the bad guy, but, I will anyway.
6'' total lift to achieve what?
if you are trying to clear 35's or 36's you are just pushing the threshold of the drivetrain itself.
saving a few hundred $$$ on the lift isn't going to build you a monster truck.
There is a method to the madness of building up a truck(within reason), What's your big picture here?
the j**p? well, yeah, parts are cheap because you need soooooo many. I'd wheel a stock IFS toy against most anything, or should I say "with".
just be carefull with "used" lifts.
think of it this way....
why are they selling it? because, it's not good enough for what they want to do.
|
|
|
|
Post by Forgotten on May 19, 2005 18:33:33 GMT -5
id put the 2in body on and maybe a little body trimming and you could fit 33s on it and it would keep your center of gravity down  |
|
Achilles
Full Member
Canadian, EH?
Posts: 169
|
Post by Achilles on Jun 12, 2005 4:00:03 GMT -5
i agree with forgotten, minimal lift with trimming is a far better way to go than spending huge dollars on a used lift... take the extra cash from not buying a huge lift and buy a quality set of 33's
|
|
|
|
Post by conductorguy on Jun 30, 2005 14:22:48 GMT -5
toyteclifts.com complete 3" lift for less than 300 bucks...
I love mine and didnt spend a fortune
|
|
