|
|
Post by Forgotten on Jun 26, 2005 17:59:22 GMT -5
who makes a small 1 or 2 in. suspension lift for IFS vehicles, I believe I saw a 1 in. sus. lift a while back. I got 32s on right now and I took off my mud flaps, but they still rub a little
|
|
|
|
Post by bowshtr on Jun 26, 2005 20:27:01 GMT -5
Hmm, 1.5 inches you can get out of cranked up torsion bars and an add-a-leaf in the rear! There are a few differnt things you can do. You can run a ball joint spacer up front and add-a-leaf in rear or block or shakles...or all if you like! You can put in some 25 mil sway away torsion bars to give you some lift and a BJ spacer in the front! Theres soo many thing you can do for an inch!
|
|
|
|
Post by Forgotten on Jun 27, 2005 22:20:36 GMT -5
I know I could crank the torsion bars and I'm probably going to this weekend if I can get any time off work, I'll prolly also put and add a leaf in the rear, I wouldn't mind having about a 2in BL, but that would take me too long by myself and my friends are dumbasses who can't tell a ratchet apart from a cresent wrench. I am also interested in ball joint spacers, but they are expensive and they sound dangerous
|
|
|
|
Post by bowshtr on Jun 27, 2005 22:34:25 GMT -5
Im goin to install a BJ lift for the front here soon! From what i have read and seen they arent too awful bad. I know im just goin to have to make sure i carry an extra ball joint or two and the main bolts incase the spacer breaks! But other then that it doesnt look too bad. And witha body lift you should be able to do it yourself! I did mine myself until i got to the bed and thats where i had a buddy help me pick it up and had my lil sis set the blocks in and run the bolts through the holes! Mine is a 3 inch body lift so it was a lil more lifting. But really you should be able to do most of the lift yourself! It doesnt take too mcuh time and its a lot cheaper then having it installed! My buddy paid 700 bucks for his body lift to be installed! F-that mess!
|
|
|
|
Post by Forgotten on Jun 30, 2005 18:15:14 GMT -5
do you know how many body lift spacers an 86' 4runner uses? I think I'm just going to fab one up myself
|
|
|
|
Post by bowshtr on Jun 30, 2005 23:33:12 GMT -5
I have no clue! Just crawl under there and see how many body mounts there are and there you go. My pickup as 12 i believe
|
|
|
|
Post by Forgotten on Jul 1, 2005 0:29:27 GMT -5
how ugly is your 3in. body lift? got any pics?
|
|
|
|
Post by bowshtr on Jul 1, 2005 14:37:41 GMT -5
www.cardomain.com/id/bowshtrBefore i hated body lifts cause the way they look, but right before i went away to school back in december i needed new tires mainly cuase of snow and stuff and i didnt want to put 31's on it caus ei knew i was goin to lift it no matter what, so i bought a cheap body lift to fit 33's under it. I might take it off one day and just do a SAS. I dont think i can get the balls to get under there and cut away all of my ifs!
|
|
