wayne98tacoma
Junior Member
98 Tacoma lifted 6" on 35's
Posts: 62
|
Post by wayne98tacoma on Aug 7, 2005 1:27:52 GMT -5
 Hi guys. I wanted to know if anyone could let me know that if by adding a spacer to a 3.5" fabtech basic adjustable lift would hurt my front end. I would like to add a 2" spacer up front on my tacoma to get a little more lift. I have my lift set a 3" right now. If I could only do 1" I guess I would go with that then if it would work. I just don't have over a thousand dollars to buy a 6" lift and another $1,500 to have it put on so I am trying to figure out a way to lift up my front end. By the way my Tacoma is a Prerunner. If anyone could let me know of some good spacer to use and a web site to get them that would be really cool. Thanks for any help posted for me. 
|
|
hossmaster
Junior Member
02 dbl cab/ 05 4runner
Posts: 57
|
Post by hossmaster on Aug 10, 2005 5:22:01 GMT -5
I don't think that is a good idea. When you add top spacers, you will over extend the ball joints and pretty much ruin them as well as strike your spindles on your coil springs. A 2" spacer on a stock coilover is not good either. Instead of adding preload to the coil, your simply moving the whole assembly down by 'X' inches.
|
|
|
|
Post by rockcrawlintoy on Aug 10, 2005 12:14:09 GMT -5
look at a total chaos lift they will have new and longer arms and it replaces the ball joints with uni balls. its a much better design
|
|
