|
|
Post by ak4runner on Jan 28, 2006 3:29:09 GMT -5
:(I own a 90 4Runner i have a 4 inch lift in the box in back .. and 35's With those tires fit with that lift?  |
|
|
|
Post by toyman on Jan 28, 2006 13:48:30 GMT -5
Prob but its gonna rub alil
|
|
8802
Full Member
Daddy's little squirt!
Posts: 167
|
Post by 8802 on Jan 28, 2006 18:30:14 GMT -5
Its gonna rub when you turn but should not be to bad but if it is put a 2 inch body lift on it. Dont forget if you dont put gears in it, its not Worth the time  |
|
|
|
Post by ronnny on Jan 31, 2006 19:03:04 GMT -5
If you get it done with no body lift can you post some pics? Or can anyoneone else that has a 4" with 35's post a pic or 2 cause this is what i am planning to do with mine.
|
|
hossmaster
Junior Member
02 dbl cab/ 05 4runner
Posts: 57
|
Post by hossmaster on Feb 1, 2006 7:23:47 GMT -5
Good luck, Tacomas need roughly 5-6 inches to truly clear 33x12.5 tires. 35's on 4 in lift won't do you any good offroad as your articulation will be limited if not erased.
|
|
|
|
Post by ronnny on Feb 3, 2006 12:25:28 GMT -5
Is his 90 model a tacoma? I have saw quite a few the same body style as my 86 still with ifs that have 4" lift and 33' that look like they got room for 35's but will need a bit of trimming to keep the tires out of the fenders. I also was planning on 5.29 gears and just a rear spool.
|
|
|
|
Post by fourwd1 on Feb 3, 2006 16:02:15 GMT -5
His post says it's a 90 4Runner
Can't you all read ??
A Taco is a pickup, and didn't come out untill 95.
You can fit 35's with 4" of lift and a little cutting of sheet metal. But they'll still rub at times.
Better to go with a little more susp lift or add a BL too.
|
|
|
|
Post by ak4runner on Feb 17, 2006 18:02:24 GMT -5
i looked for months and couldnt find a complete kits bigger than a 4 " Im planing on running 5.11's but im not sure if those are suffecent gears .. and i have yet to find a Bl for an automatic . if anyone knows of a way to make a bl work for an automatic please let me know
all help is GREATLY apreciated .. thanks
|
|
|
|
Post by floridamud65 on Mar 15, 2006 0:07:09 GMT -5
I have a 4" sus and a 3" BL.  My buddy has a 3" BL and runs 35's |
|
|
|
Post by fellowsped on Mar 15, 2006 11:18:52 GMT -5
only one who makes a body lift for an auto is 4crawler www.4crawler.com/4x4/ForSale/BodyLiftKit.shtml but if i was you i would put the tires on maybe do a little fender trimming and see if you could make it work to save some cash and keep the cog low but then again i'm just anal about my cog. |
|
|
|
Post by norcalyota on Mar 20, 2006 22:58:57 GMT -5
I run a 3" body, when my tires were new it rubbed a lil, but only sometimes.
|
|
|
|
Post by Forgotten on Mar 30, 2006 20:24:27 GMT -5
if you wanted, you could add the 4in lift with some bushwacker cut out flares, that way, youd have the room, and youd be legal
|
|
