|
|
Post by nothingface5384 on Mar 4, 2007 12:12:19 GMT -5
hey quick question, i recently purchased marlinc sas/ 4in matching rear a few months back, but dont plan to get it on til end of this year.and i was planning on getting my new rims/tires now
so my question is would 35x1250s on an 8in..3.75 bs fit ok on my 92 toy with 3 in b/l?
i'm sure i might have to crank the torsion bars
i just cant wait til i get my sas/SL completed and am tired of filling my 31s up every week or so..
|
|
|
|
Post by fourwd1 on Mar 4, 2007 20:01:13 GMT -5
You're bound to get some (or more) rubbing, and may need to do something for the rear to match the cranked t-bars in the front (which isn't the best way to get lift) for the short term until you do the major surgery.
|
|
|
|
Post by rockcrawlintoy on Mar 4, 2007 20:55:27 GMT -5
in the few hours it takes to put the body lift on u can do the sas. just weld everything before hand. The last sas i did took 5 hours
Drew
|
|
|
|
Post by nothingface5384 on Mar 4, 2007 21:40:51 GMT -5
no, the truck had the 3inch bl on when i bought it..i dont have any tools to do a sas, nor have i ever atempted one...just started wekding...mid term comming up
i'm more of a body man then a mechanic
but most importantly i still need to buy gears, lockers and a long spline shaft.. all i have is just the sas kit/ matching rear and solid axle/drivershaft..
|
|
|
|
Post by live4yotas on Apr 17, 2007 21:54:54 GMT -5
Should fit man. I had a 86 Ifs 4x4 with cranked torsion bars with 15x10 rims and 33x12.50 m/t's. Never once hit or anything. That was without the 3" of bodylift you have so you shouldn't have a problem after you crank the torsion alil.
|
|
