|
|
Post by Pat Sullivan on Jul 26, 2004 9:56:59 GMT -5
these springs are great in the front of my 83' but the back stinks, they seem to be too short and everyone i know with the older style has this problem. these springs have been jumped, and wheeled with over 700 pounds in the bed for months yet no sag. my shackles keep inverting and im gonna have to move them forward. not a good rear spring for the older rigs. there seems to be no prob from 84 and up..
|
|
|
|
Post by cmillgo on Sept 9, 2004 5:05:26 GMT -5
keep us updated on what you decide
|
|
|
|
Post by Zartan74 on Nov 7, 2004 8:17:51 GMT -5
I have the 4" procomp springs on the rear of my 87 4runner and they were extremely stiff when I put them on. I then pulled the overload leaf out of the procomp pack and put the stock toyota overload leaf in the procomp spring pack and now they have adequate flex but not anything great and they did settle about an inch after the swap.
|
|
|
|
Post by 36onatoy on Jan 10, 2005 9:14:08 GMT -5
i had thst same problem with the superlift 4inch springs way too stiff so i switched overloads
|
|
|
|
Post by Pat Sullivan on Nov 8, 2005 21:47:49 GMT -5
oooh long time. i pulled the overload out put an 800 pound bed on it. and wheeled it for a weekend hard. put the overload in and now it is fine.
|
|
