|
|
Post by yotaman19 on Apr 12, 2006 1:01:41 GMT -5
hey i keep poping fuses on my amp power wire its never happened before does anyone got any tips or tricks or something i am getting really pissed and its when i go to put the posittive side back on the battery psot or the orther way around if i got to put the nagitvie side back on with positive already on what the fuck is going on here?
|
|
|
|
Post by DrumBum on Apr 12, 2006 2:32:49 GMT -5
i'd say trace your wiring and see if you've got any breaks in the wire casing. like if it's been rubbing on metal and went through, which would cause it to arc and blow a fuse when you made a complete curcuit by putting both battery cables on.... somethin to check
|
|
|
|
Post by BurntOrngeLonghorn on Apr 12, 2006 18:55:50 GMT -5
Where do you have your amp wire running into the cab??...that would be the first place I look.
If not there then look to make sure your amp is grounded, and the ground and power wire are not touching.
|
|
|
|
Post by ronnny on Apr 12, 2006 19:10:24 GMT -5
what they said but if you don't see anything then do you have a multimeter?
|
|
|
|
Post by bowshtr on Apr 14, 2006 21:15:20 GMT -5
I had the same problem! Turned out to be a faulty ground off the amp causing it to short out and pop the fuses. I put a new connection on the end of the ground wire/cable and made sure i had good contact. Fixed everything.
I was rather frustrated when trying to figure out the problem until my sister came up to talk to me and noticed a lil spark under my seat....lol Gotta love them younger siblings!!!!
|
|
|
|
Post by yotaman19 on Apr 15, 2006 13:18:38 GMT -5
hey thanks guys i had and arc in my wire fixed that poblem and it works fine now.
|
|
