|
|
Post by pauch613 on Sept 24, 2003 21:45:31 GMT -5
i have a 85 4runner (manualtrans) will a trans out of a 84 pup work, also are the axles the same???
|
|
|
|
Post by fourwd1 on Sept 25, 2003 8:19:00 GMT -5
The axles (F & R) are the same.
The tranny will probably work in this situation.
The 84 p/u should be carbed and have a G52 5 spd connected to a forward shift t-case (t-case shifter is mounted to tailshaft housing at rear of tranny).
The 85 4Runner is probably EFI (22RE) and has a W56 5 spd and a top shift t-case (t-case shifter is on t-case).
The top shift t-case will bolt up to the G52 tranny, but you will have to make a plate to block off the now unused shifter hole on the tranny.
You couldn't do the opposite (bolt carbed t-case to EFI tranny), because the EFI tranny wouldn't have a spot for the shift rails to go into.
|
|
|
|
Post by pauch613 on Oct 1, 2003 21:18:12 GMT -5
one more question is there any advantage gear wise to use transfer from 85 on the 84(carb)trans
thanks for the info!!!
|
|
|
|
Post by fourwd1 on Oct 2, 2003 7:01:04 GMT -5
I'm pretty sure the ratios are the same for the 2 trannies.
The EFI tranny is a little stronger than the carbed one.
|
|
