Nick
Full Member
1990 4Runner
Posts: 146
|
Post by Nick on Feb 24, 2004 23:52:01 GMT -5
I just bought a rebuild kit for my carb, its completely apart and now soaking in carb cleaner for the nite. My question, i am totally gonna blow it on putin it back together, the instructions kinda suck.
Any advice?
|
|
|
|
Post by fourwd1 on Feb 25, 2004 0:07:03 GMT -5
Hopefully you kept track of how it came apart and what screws, etc go where, so you can get it back together. That's the hardest part. Some of the adjustments they tell you to do need specialized tools, so I just left those as is when I did mine, hoping they were correct. I musyt have done a decent job,as it' runs fine, and din'r run at all before I rebuilt it.
Good luck.
|
|
Nick
Full Member
1990 4Runner
Posts: 146
|
Post by Nick on Feb 25, 2004 0:48:05 GMT -5
Well it would start up like a peice of junk, then it would run some what ok but is way underpowered, even for the 20r. I didn't really keep track of the screws and stuff, i just took it apart, i drew a diagram of the hoses that connect to the carb itself. If for some reason i cant get it back together what are my options?
|
|
